行業資訊
盤點選擇冷再生機施工體現出的5大優勢？
來源：http://www.bvzokj.cn/ 日期：2021-05-14
科技的飛速發展讓人們對不同領域的知識都有了一定的涉及，人們可以通過很多渠道獲得自己想要的，工程師提到其設備是一種道路施工中常用的機器，在此今天就給大家介紹一下使用冷再生機施工的優勢體現在如下5個方面：
With the rapid development of science and technology, people have a certain amount of knowledge in different fields. People can obtain what they want through many channels. Engineers renting cold recycling machine mentioned that its equipment is a kind of machine commonly used in road construction. Today, I would like to introduce the advantages of using cold recycling machine in the following five aspects:
1、簡化了施工過程。由于冷再生機銑工作是將原有的舊路面材料碾碎，在車體內，將碾碎的廢骨料在攪拌腔中攪拌直接攤鋪，省去了新骨料的挖掘、運輸、攪拌站拌和加工、攤鋪機攤鋪等一系列工作。，簡化了施工過程。
1. The construction process is simplified. Because the cold recycling machine milling work is to crush the original old pavement materials, in the car body, the crushed waste aggregate is mixed in the mixing cavity and directly spread, which saves a series of work such as excavation, transportation, mixing and processing of mixing plant, and paving of paver. The construction process is simplified.
2、避免道路施工造成的交通堵塞問題。由于冷再生機械在施工過程中省略了攪拌站的運輸和攪拌過程，施工現場的設備投資相對較小。這有效地減少了由于道路建設而造成的交通流量，并產生了較大的負荷。因為冷再生機是在施工和道路施工過程中，我們可以選擇半路施工和半路施工，這樣可以在不影響交通正常使用的情況下修路。
2. Avoid traffic jams caused by road construction. Because the transportation and mixing process of mixing station are omitted in the construction process of cold recycling machinery, the equipment investment on construction site is relatively small. This effectively reduces the traffic flow caused by road construction and produces a larger load. Because the cold recycling machine is in the process of construction and road construction, we can choose half way construction and half road construction, so that we can repair the road without affecting the normal use of traffic.
3、施工效率高。傳統的筑路工藝是先用銑刨機對廢棄路面進行碾磨，然后運至攪拌站進行攪拌處理，再運回施工現場用攤鋪機攤鋪、壓路機碾壓。在施工過程中，現場冷再生機械屬于一次性成型(即冷再生機械一次通過待修復道路后完成銑、拌、鋪筑)，以便隨著施工進度的推進陸續打通已完工的道路。它可以大大縮短維護路面和提早開放交通所需的時間。
3. The construction efficiency is high. The traditional road construction technology is to grind the waste road surface with milling machine, then transport it to the mixing plant for mixing treatment, and then transport it back to the construction site to pave with paver and roller to roll. In the construction process, the cold recycling machinery on site belongs to one-time molding (that is, the cold recycling machinery passes through the road to be repaired at one time, and then the milling, mixing and paving are completed), so as to open up the completed roads with the progress of construction. It can greatly reduce the time required to maintain the road surface and open traffic earlier.
4、保護生態環境，從而有效的節約資源和能源。由于冷再生機銑后的廢料幾乎全部可以直接送入攪拌倉進行地面攪拌攤鋪，減少了新石料的開采，不需要考慮廢料的運輸和堆放。大大地保護了環境。冷再生器在工作中不需要加熱和混合物料，節省了大量能源。冷再生機是對廢舊路面原材料進行再利用的一種設備。它沒有污染，因此被稱為綠色建筑技術。
4. Protect the ecological environment, so as to effectively save resources and energy. Since almost all the waste after cold recycling machine milling can be directly sent to the mixing bin for mixing and paving on the ground, the exploitation of new stones is reduced, and the transportation and stacking of waste materials are not necessary. It has greatly protected the environment. The cold regenerator does not need heating and mixing materials in operation, which saves a lot of energy. Cold recycling machine is a kind of equipment for recycling the raw materials of waste pavement. It has no pollution, so it is called green building technology.
5、有效的降低了施工成本。與傳統施工方法相比，冷再生機械租賃后在施工過程中省略了大量的設備、人員和材料，相對成本就比較低。
5. The construction cost is effectively reduced. Compared with the traditional construction method, a large number of equipment, personnel and materials are omitted in the construction process after the leasing of cold recycling machinery, so the relative cost is relatively low.
公司地址：濟南市槐蔭區經一路273號群盛華城2號樓1-404
公司名稱：山東途暢路橋工程有限公司 
備案號：